• Detachable & Autoclavable Handpiece YES.
• Working Modes 1.Scaling, 2.Perio, 3.Endo.
• Frequency Tracking Automatic.
• No. of Titanium Scaling Tips 5 (3 S, 1 P, 1 Stain Removal).
• Endo Attachment Yes.
• Power Input 100V to 240V~ 50Hz/60Hz 1.2A (Max).
• Output Power 3W to 20W.
• Frequency 28 kHz + 3 kHz.
• Dimension 188 mm X 159 mm X 81 mm.

• Equipped with clear bright LCD, clear image and different color indicate the trajectory of the file clearly. 
• Based on advanced multiple frequency network impedance measurement technology and automatic calibrating ensures the measurements are accurate. 
• Autoclavable file clip, file hook, file probe. Avoiding cross infection effectively.
• When doing the measurement, the changes of the sound can indicate the position of the file in the root-canal.

• Detachable handpiece with LED light for better visibility
• Shell of the handpiece is made of special imported plastic from America
• Compatible with a Woodpecker/ EMS connection

• Main unit input : 24V~ 50Hz/60Hz 1.3A
• Output power : 3W ~ 20W
• Frequency : 28kHz ± 3kHz
• Water pressure : 0.1bar ~ 5bar(0.01MPa ~ 0.5MPa)
• Main unit weight : 0.2kg
• Dimensions : 74mm×56mm×38mm
• Operating Mode : Continuous Operation
• 1 Year warranty.

• Clinical data matching, accuracy rate has been improved to 97.71%
• Upgraded chip, real time response. The sensitivity has been improved to double.
• Inovative algorithm, multi-frequency measurement & anti-interference.
• LCD Screen, the trajectory of the file can be clearly shown with different colors.
• Multi-frequency apical positioning technology,
• avoiding the influence of subjective factors for measurment results.
• Measurment results will not be affected by tooth type,
• Root canal internal environment.

• LED C uses the principle of Ray Radiation to solidify the light-sensitive resin by shooting at it in a short time.

• HW-5L Optical handpiece
• spare parts for woodpecker LED ultrasonic scaler
• UDS-E LED, UDS-L LED, UDS-A LED,UDS-P LED, UDS-N2 LED and UDS-N3 LED
• Wooderpecker scalers with detachable handpiece, with light, better visibility, autoclavable.

• Strong optical output power.
• 3 treatment modes: Normal, Ramp & Pulse.
• DIGITAL Time setting: 0~20s for LED curing light.
• Full color LCD display.
• LED cold light output can treat all dental tissue.
• Alarm for low voltage.
• Working Voltage – 100-220 VAC, 50-60 Hz.
• Working volt : 4.2-4.5 volts.
• Electric current : 0.7 amperes.
• Battery capacity: 1400mAH.
• Lumiminous intensity:> 1200MW/cm2 5 w.

• Woodpecker DTE Dental Ultrasonic Scaler LED Detachable Handpiece HD-7L Original

• Woodpecker Scaler Wrench/Key (TW-1L)

• Automatic frequency tracking ensures that the machine always works on the best frequency and more steadily.
• Digitally controlled, easy operation and more efficient for scaling.
• Power input 110V~ 50Hz/60Hz

• Stable output of light intensity, the solidification effect is not affected by the consumption of remaining power.

• Digitally controlled, easy operation and more efficient for scaling. 
• Power input 110V~ 50Hz/60Hz.
• 220 - 240V~ 50Hz/60Hz. 
• Main unit input 24V~ l.3A.
• Output power 3W ~ 20W.
• Frequency 28kHz ± 3kHz.

• Steel bearing.
• Mini-head.
• Push button.
• Easy to use.

• 2 working Modes: Scaling & Perio
• Detachable and Autoclavable Handpiece
• Operation Digitally Controlled
• Working Frequency 28kHz-31kHz
• Power Input 100V to 240V-50hz/60/Hz 1.2A(Max)
• Output Power 3W to 20W
• Dimensions 196mm X 134mm X 80mm
• Main Unit Weight 0.62 kg 
• No. of Tips 5
• Frequency Tracker Automatic

• Optical handpiece, more convenient for clinical operation.
• Automatic frequency tracking ensures that the machine always works on the best frequency and performs more steadily.
• The handpiece is detachable and can be autoclaved to the high temperature of 135? and the pressure of 0.22MPa. 

• 1. One detachable cable tube. 2. Brand New; Durable; 100% CE High Quality. 3. Compatible with EMS & Woodpecker Ultrasonic Dental Scaler.

• Sealed handpiece with light, better visibility.
• The handpiece sleeve can be autoclaved.
• Automatically search the best working frequency.
• Accurate feedback control and constant power output,ensure a more comfortable feeling to patients. 
• Power input 110V~ 50Hz/60Hz 220 - 240V~ 50Hz/60Hz
• Main unit input 24V~ 50Hz/60Hz 1.3A
• Output power 3W to 20W
• Frequency 28kHz±3kHz

• Offered set of 5 Tips is for Woodpecker D3 Scaler (Optic/Non-optic)

• Dental Piezo Scaler Tips Tip Wrench Torque Key Satelec DTE EMS Woodpecker.

• Using a light guide, center the light source over the detector window read the useful curing power in mw/c.
• Used to test the curing power of dental curing light etc.
• Measures useful curing energy up to 3500 mW/cm2.
• Light, compact design.
• Capable of measuring both LED and halogen curing lights.
• Able to measure intensity up to 3500mw/cm2.

• Metal shell, five colours optional.
• Wireless. The battery can be replaced.
• Three working modes: Full, Ramping, Pulse.

• Fully compatible with Satalec and NSK handpieces and tips.
• Detachable handpiece with LED light.
• Automatic frequency tracking system.
• Maximum autoclaveable temperature: 135°C. 
• Maximum autoclaveable pressure: 0.22MPa.
• Dimensions: W74mm x D56mm x H38mm
• Operating Mode: Continuous Operation.
• Weight: 0.2kg.
• Power Input: 22v-240v.

• CURE 2MM RESINS IN ''1'' SECOND.
• MAXIMUM INTENSITY OF 3000 mw/CM2.
• TWIN MODE- P1(HIGH INTENSITY MODE); P2(NORMAL INTENSITY)
• FREE SET OF DISPOSABLE SLEEVES.
• UNBREAKABLE PROBE WITH 360 DEGREE ROTATION.

• Minipex Apex Locator

  Simplified body design with high sensivity, 

  • Measurment accuracy upto 97.71%
  • Updated chip, real time response, double sensiblity
  • Innovation algorithm, intelegent anti-interference 
  • total weight of merely 71g
  • Dimension: 70mm * 62mm * 20mm
  • With superb technique100% automatic digital calibration, with no decrease in measurement accuracy.

• Most widely used.
• Most economical.
• Reliable.
• Easy to use and maintain.

• This device is use for any type of Pulpitis . Pulp necrosis and periapical periodontitis
• This device must only be used in hospital environment . clinics or dental offices by qualified dental personnel.
• Contraindications
• cases where a patient has been filled with an implanted heart pacemaker (or other electrical equipment ) and has been cautioned against the use of small electrical appliances (such as electric shavers. hair dryers. etc ) it is recommended not to use the this device.

• Detachable handpiece with LED light for better visibility
• Shell of the handpiece is made of special imported plastic from America
• Compatible with a Woodpecker/ EMS connection
• Please note: LED compatible unit is required for an LED handpiece to operate
• Compatible with - UDS-K LED, UDS-N2 LED, UDS-L LED, UDS-N3 LED, UDS-A LED, UDS-P LED, UDS-E L

• Detachable & autoclavable handpiece.
• 2 modes : Scaling & Perio.
• Automatic frequency tracking.
• With 5 Tips (3 S, 1 P, 1 Stain Removal).
• Power input : 100V to 240V~ 50Hz/60Hz 1.2A (Max).
• Output Power : 3W to 20W.
• Frequency : 28kHz + 3kHz.
• Dimension : 196 mm X 134 mm X 80 mm.

• Micrometric Cutting which ensures max. surgical precision and intra-operative sensibility.
• Selective Cutting ensures max safety for the soft tissues.
• Cavitation effect helps in achieving max. intra operative visibility.
• Automatic tuning circuit prevents wear of tips as well as guranatees work in constant condition with utmost efficiency.
• LED handpiece ensures better vision.
• Oral Surgery.
• Orthopedic Surgery.
• Maxillofacial Surgery.
• Cosmetic Surgery.
• Neurosurgery.
• Otolaryngology.

• 3 Ultrasonic Dental Scaler Endodontic Tips E1 E2 E3 For EMS & Woodpecker Handpiece.

• Easy operation : Bone Function, Root Function, Clean Function.
• Mainly used in oral surgery, plastic surgery, orthopaedics, division of osteotomy, osteoplasty surgery and bone collection.
• LED handpiece insure better vision.
• Power input 200 - 240V~ 50Hz/60Hz 360mA (MAX)
• Power input (Optional) 100 - 120V~ 50Hz/60Hz 720mA (MAX)
• Working frequency 24kHz~29.5kHz
• Output power 3W~20W
• Main unit weight 3.8kg
• Dimensions 330mm X 254mm X 167mm

• Optical handpiece which helps to do clinical operation conveniently.
• Auto water supply function saves your time.
• Ehanced performance of endo and perio mode.
• Detachable handpiece which can be autoclaved to the 135°C temperature.
• Automatic frequency tracking system that monitors its working for steady performance.
• Controlled by PC, easy operation and more efficient for scaling.

• 3 Ultrasonic Dental Scaler Endodontic Tips E1 E2 E3 For EMS & Woodpecker Handpiece.

• Light weight titanium hand piece make the scaling process stress free.
• Easy Power selection make the process of supra & sub gingival scaling to take place conveniently.
• Frequency tracking automatically, sustained.
• G1- scaling
• G2- scaling
• G4-Stain removal
• P1-Subgingival scaling
• P2- Subgingival Scaling
• E1-RCT (Endo Attachment)

• Woodpecker, High Quality Manufacturer.
• Comfortable ergonomic design
• Simple one-button function.
• Constant light intensity output.
• Wireless

Features

• Two working modes: HIGH & NORMAL

• Time Setting:Constant light intensity. Solidification effect is not affected by the consumption of remaining power.

  • HIGH 1s, 3s
  • NORM 5s, 10s, 15s, 20s

• Large capacity battery. a full charge can be used for more than 400times continuously under 10s working time mode.

WARRANTY

18 Month Warranty

• Automatic frequency tracking ensures that the machine always works on the best frequency and performs more steadily.
• The handpiece is detachable and can be autoclaved to the high temperature of 135°C and the pressure of 0.22MPa.
• Digitally controlled, easy operation and more efficient for scaling.
• Power input 110V~ 50Hz/60Hz
• 220 - 240V~ 50Hz/60Hz.
• Main unit input 24V~ l.3A.
• Output power 3W ~ 20W.

• Ultrasonic Scaler UDS E-Led by woodpecker is a multi-function scaler that works in three different modes 

• • Automatic frequency tracking ensures that the machine always works on the best frequency and performs more steadily.
  • The handpiece is detachable and can be autoclaved to the high temperature of 135? and the pressure of 0.22MPa. 
  • Digitally controlled, easy operation and more efficient for scaling.

• Wireless. The battery can be replaced.
• Three working modes: Full, Ramping, Pulse.
• Time setting: 5s 10s 15s 20s 25s 30s 35s 40s.
• Automatic memory.
• A full charge can be used for over 200 times (10 s/time).
• Constant light intensity, the solidification effect is stable even the battery power decrease.
• with wire or wireless. Even the battery runs out, it can work by connecting power supply with wire.

• Scaling tip : G1T
• Compatible with EMS & Woodpecker.

• Sealed handpiece.
• Automatic frequency tracking.
• Automatically search the best working frequency.
• Two colours optional. 
• Power input 110V~ 50Hz/60Hz
• 220 - 240V~ 50Hz/60Hz 
• Main unit input 24V~ 1.3A
• Output power 3W~20W
• Frequency 28kHz±3kHz
• Main unit weight 0.62kg
• Adapter weight 1.2kg

• Woodpecker D5 Scaler Tips

Endo Smart- Woodpecker An endomotor used in the shaping of the root canals during endodontic treatment. It has a cordless handpiece that assures ease of use even during the most delicate endodontic procedures. The light weight endodontic motor effectively prevents needle breakage wireless battery charging automatic torque calibrating user customization up to 9 Product Code: rot1 Brand: Woopecker

• Clinical data matching, accuracy rate has been improved to 97.71%
• Upgraded chip, real time response. The sensitivity has been improved to double.
• Inovative algorithm, multi-frequency measurement & anti-interference.
• LCD Screen, the trajectory of the file can be clearly shown with different colors.
• Multi-frequency apical positioning technology,
• avoiding the influence of subjective factors for measurment results.
• Measurment results will not be affected by tooth type,
• Root canal internal environment.