• Cavity lining/base & Pulp-capping.
• Pulpotomies & Obturation/Sealing.
• Apexification & Root-end filling.
• Perforation healing & Root resorption.
• Finer powder for smoother, easier mixing, handling and placement.
• Handy packaging-protects powder in desiccant-lined container.
• Dispense powder as needed.
• Optional gel for stability and washout resistance Non-cytotoxic & anti-microbial in vitro against common bacteria and E. Faecails
• No special equipment or dispensing instruments needed.

Prevest Orafil G

Ready to use zinc sulphate cement for provisional filling and temporary insertion of permanent crowns and bridges.

• Micron Silver is PRE MIXED radiopaque, silver alloy Glass Ionomer Cement for restoration of primary teeth, core build up, restoration of class I, limited class II cavities and as a base and liner material.

• For chemical-mechanical preparation of root canals.
• Cleansing and enlarging of calcified root canal.
• Contains appropriate lubricant to minimize potential of file breakage.
• Helps in mechanical as well as chemical cleansing of root canal preparations.
• 17% EDTA helps in chelating the calcium salts.
• Gel helps lubricate endodontic instrument and makes penetration easier.
• 10% carbamide peroxide promotes internal bleaching on irrigation with hypochlorite solution.
• Syringe tip delivery. Unsurpassed chelating action.

• Gentle and permanent whitening of teeth in cases of staining due to medication, fluorosis, food, tobacco and ageing
• Whitening of non vital teeth.
• Zero sensitivity formula.
• Thick consistency gel.
• High percentage of active teeth whitening ingredients.
• Safe and gentle - optimized Ph.

Fusion Core DC Flo is a dual cure, radiopaque, two component, core build-up material in a convenient automix delivery syringe.

• Highly tenacious blend of hydro carbon waxes used to hold material or pieces in position.

• For chemical-mechanical preparation of root canals.
• Cleansing and enlarging of calcified root canal.
• Contains appropriate lubricant to minimize potential of file breakage.
• Helps in mechanical as well as chemical cleansing of root canal preparations.
• 17% EDTA helps in chelating the calcium salts.
• Gel helps lubricate endodontic instrument and makes penetration easier.
• 10% carbamide peroxide promotes internal bleaching on irrigation with hypochlorite solution.
• Syringe tip delivery. Unsurpassed chelating action.

Glass ionomer restorative self cure in handmix version for restoration of primary teeth, core build up.

Nanoseal-S is a cold flowable polydimethylsiloxane based root canal sealer with micro silver.

• Blue tinted viscous gel/ liquid of 37% phosphoric and 2% benzalkonium chloride for etching techniques.

• Used for temporary dressing.
• Mixed with eugenol and is used as a temporary cement. Eugenol Oil is used for temporary relief of localized dental pain.
• Ideal cavity liner under most restorative materials.
• Chemically pure Eugenol Oil with increased effectiveness.
• Arsenic free. 

Excellent physical properties due to added unique polymer reinforcing agents.

Orafil Lc is a light curing, ready to use temporary filling material which remain elastic after curing and can be easily removed in one place

• Blue tinted viscous gel/ liquid of 37% phosphoric and 2% benzalkonium chloride for etching techniques.

• It is widely indicated as final irrigant during chemomechanical preparation It is choice of irrigant while performing retreatment root canal procedures.
• It is indicated as an irrigant in apical 3rd of root before retrograde filling during apicoectomy (root end surgery).

• For conditioning of both dental enamel and dentine surfaces before placing adhesive restoration.
• 37% phosphoric acid to give best dentine etching results Provides controlled depth of dental etch Does not dry etched tooth surface.

Disodium Edetate solution with neutral pH for chemical, mechanical cleansing and enlarging of root canals.

• Endoseal is radiopaque, non-resorbable paste for the permanent obturation of the root canal.

• Wax blocks suitable for carving tooth anatomy specifically designed and developed for dental students.

• For creating reservoir space for bleaching trays.
• Blocking out undercuts.
• For laboratory mock-up on models.
• Other laboratory procedures.
• Single component material blocks out defects and undercuts on the model quickly, precisely and securely.
• Simple application with no sticking to instruments.

Hemostal is 25% buffered aluminum chloride solution for stopping minor gingival bleeding during restorative procedures, placement of metal bands, cervical matrixes, and crown preparations.

Oratemp C&B (crown and bridge material) is a two component self curing composite material for chair side fabrication of temporary crowns, bridges and other temporary intra-coronal restorations.

• Cavity lining/base & Pulp-capping.
• Pulpotomies & Obturation/Sealing.
• Apexification & Root-end filling.
• Perforation healing & Root resorption.
• Finer powder for smoother, easier mixing, handling and placement.
• Handy packaging-protects powder in desiccant-lined container.
• Dispense powder as needed.
• Optional gel for stability and washout resistance Non-cytotoxic & anti-microbial in vitro against common bacteria and E. Faecails
• No special equipment or dispensing instruments needed.

• Restorations like inlays, crowns, bridges, dentures and orthodontic applications.
• Study models.
• Opposing detentions.
• Extremely good powder-water affinity.
• Dust free & lead free.
• Highly elastic with excellent elastic memory.
• Easier and quicker to mix without bubbles or inconsistencies.
• Better taste with no excessive salivation, which is pleasant for patient and user Ideal thixotropic properties so it flows easily under light pressure without causing gagging.
• Excellent adhesion to hydrocolloid materials.

• Correction models.
• Raising the edges of the impression.
• For primary impression in edentulous cases before preparing special tray.
• Easy to adjust.
• Alteration to impression can be made easily to achieve accurate impression.
• Excellent compatibility with most hydro-colloid or silicone materials.

• For direct & indirect pulp capping and pulpotomy.
• Apexifications and hard tissue formations.
• Temporary filling material for infected root canals.

• Protection of gums during the whitening or other dental treatments
• Light cured resin-based gingival barrier.
• Protects soft tissue with impervious seal.
• Easily removable after bleaching.
• Convenient to apply from syringe.

• Vestibular parts of wax models of removable dentures.
• Pre-forms of jacket crowns.
• Modelling of acrylic saddle supporting the teeth.
• For occlusal registration (Bite Blocks).
• Manufacturing of spacers for custom impression tray.
• AII purpose, multi utility wax.
• Extra toughness.
• High quality controlled by use of high quality materials and perfect production management.
• Carves without chipping Boils out cleanly.
• Temperature stable during trial insertion and yet easily deformable ADA Type I.

• Cementation of crowns, bridges and splints.
• Retentions of temporary crowns and bridges.
• Trial cementation of permanent restorations prior to final insertion.
• Excellent physical properties.
• Easy to mix - easy to clean.
• Low solubility in oral fluids.
• Increased patient comfort.

• Micron Bioactive is a radiopaque, Hydroxyapatite Modified-Glass Ionomer Cement for restoration of primary teeth, core build up, restoration of class I, limited class II cavities and as a base and liner material.

Florence In-office whitening system is rapid and easiest way to effectively whiten the teeth In-Office. It is based on pH-Activated, 35% Hydrogen Peroxide formula with build in desensitizer.

• Used for temporary dressing.
• Mixed with eugenol and is used as a temporary cement. Eugenol Oil is used for temporary relief of localized dental pain.
• Ideal cavity liner under most restorative materials.
• Chemically pure Eugenol Oil with increased effectiveness.
• Arsenic free. 

Fusion Self Comp is a self-cured micro fine hybrid composite with high filler loading (filler content > 80%) which imparts high compressive strength to the material.

• Fusion I-Seal is a light cured glass ionomer cement for lining, extended fissure sealing and smaller lesions.

• Ideal wax with excellent plasticity for modeling of complicated preparations such as inlays, onlays, crowns and bridges.

Direct, light cured/self-cured composite and compomer restorations.

Micron Luting is a convenient self curing, fine particle, fluoride releasing, glass ionomer luting cement for crowns, bridges, securing inlays, onlays, post, and orthodontic brackets.

Platina Hi-Gloss is an aluminium oxide paste for final polishing of direct or indirect anterior and posterior resin restorative materials. It contains potassium nitrate topical desensitizer for patient comfort.

• Used for temporary dressing.
• Mixed with eugenol and is used as a temporary cement. Eugenol Oil is used for temporary relief of localized dental pain.
• Ideal cavity liner under most restorative materials.
• Chemically pure Eugenol Oil with increased effectiveness.
• Arsenic free. 

• Produces extremely durable repairs and relines to existing dentures.
• Exhibits very high bond strength to existing denture acrylics of all types.
• Exceptionally high mechanical strength and high lusture finish.
• Cadmium free composition.
• Repair of full and partial dentures.
• Relining of full and partial dentures.
• Extensions to dentures.

Excellent cavity liner compatible under most restorative materials.

• Premium dental plaster with extra fluidity for pouring bases and opposing models.

Protective varnish based on Copal gum for insulating exposed dentine and providing thermal barrier.

New resin formula for strong & long lasting sealant.

• Ideal for temporary root filling.
• Pulp capping.
• Pulp protection.
• Provides insulation in deep cavities.
• Provides bactericidal effect on carious dentine.
• Paste delivered to root apex provides pulp insulation.
• Protects the vital pulp from infections and further decay.
• Can be easily removed from root canal by simple irrigation.

• Extra fine.
• Arsenic free.
• Makes a smooth paste with eugenol.
• Provides sufficient compressive strength.

• Gentle and permanent whitening of teeth in cases of staining due to medication, fluorosis, food, tobacco and ageing
• Whitening of non vital teeth.
• Zero sensitivity formula.
• Thick consistency gel.
• High percentage of active teeth whitening ingredients.
• Safe and gentle - optimized Ph.

Zinc F+ is a zinc phosphate cement which has universal application for crowns and bridges and as a liner/core or base material. Zinc F+ offers an extremely accurate fit with very high mechanical strength.

Comprehensive set for intraoral repairs of ceramic and composite restorations. This comprehensive system comprises the necessary bonding and veneering materials.

• Vestibular parts of wax models of removable dentures.
• Pre-forms of jacket crowns.
• Modelling of acrylic saddle supporting the teeth.
• For occlusal registration (Bite Blocks).
• Manufacturing of spacers for custom impression tray.
• AII purpose, multi utility wax.
• Extra toughness.
• High quality controlled by use of high quality materials and perfect production management.
• Carves without chipping Boils out cleanly.
• Temperature stable during trial insertion and yet easily deformable ADA Type I.

• Custom impression trays for impressions of edentulous jaws.
• Manufacturing of wax bite registration templates.
• Modeling work.
• High quality shellac for perfect results.
• Retains heat for a prolonged time.
• Optimum thickness for high mechanical strength.
• Easily adaptable Shape stability after cooling down.
• Not adhesive to plaster.

Low viscosity, light and chemically cured, radiopaque, two component micro fine hybrid composite for the adhesive luting of composite and ceramic restorations.

• As direct / indirect restorations with light cured composites.
• Single step bonding agent for direct composite restorations.
• Excellent adhesion to dentine and enamel.
• Long lasting bonding strength.
• Universal for all light curing restorations.

• For painting the plaster of the muffle before pressing the meth-acrylate resins.
• Isolating film to prevent the resin from sticking to the plaster.
• Prevents denture from sticking to stone during acrylic processing.
• Uniform film thickness permits closer adaptation of acrylic resin to model.
• Prevents distortion in fitting of acrylic resin Pink Color Emulsion.

• As direct / indirect restorations with light cured composites.
• Single step bonding agent for direct composite restorations.
• Excellent adhesion to dentine and enamel.
• Long lasting bonding strength.
• Universal for all light curing restorations.

• Pumice powder is used for cleaning teeth and restore gleam. it is also used in the finishing of dentures.

• Removal of dentinal Smear Layer.
• To Condition the dentine.

Alvocure is a dry socket treatment and post extraction dressing. It provides a soothing effect throughout the healing process. Its fibrous consistency allows for easy filling of the socket.

Eposeal is a Root Canal Sealing Material of two component paste-paste composition based on epoxy resin and tri-calcium phosphate.

• For border extensions on impression trays.
• Ideal for recording full depth of suclus.
• Modify dentate tray by building up material where tooth has been extracted.
• Make functional and relining .
• Fast and uniform plasticity.
• Easy to warm up.
• Quick hardening in cold water.
• Wide working area.

Premixed Calcium hydroxide paste containing iodoform with improved radiopacity and antimicrobial effect.

Ready to use zinc sulphate cement for provisional filling and temporary insertion of permanent crowns and bridges.

Fusion Flo is an excellent flowable composite that delivers high strength & wear resistance. It is characterized by optimum surface affinity, penetrates into the most difficult area.