• Eugenol free.
• High bond strength.
• The optimal option for patients allergic to eugenol.
• Delivers optimal consistency for solid, complete restoration seatings.

• XP BOND® is a universal self-priming dental adhesive designed to bond resin based light-cured restorative materials to enamel and dentine.

• Hy-bond Polycaroboxylate cement is indicated specifically for successful cementation of cast restorations and orthodontic appliance.

• An etching gel for use with Scotchbond™ Universal Adhesive.

Transbond™ XT Light Cure Adhesive bonds metal and ceramic brackets to tooth surfaces. Available in both syringes and capsules, this adhesive uses light cure adhesive technology to provide you with additional working time to ensure accurate bracket placement.

• Pre-treatment of glass-ceramic surfaces prior to the adhesive luting procedure with luting composites.

• Light Cure Radiopaque Composite for Posterior Bite Raise in Orthodontics.

25-30 single pontic anterior bridges, or 40-70 fiber reinforced composite restoratons. Each kit comes with enough material to make about 18 to 20 canine-to-canine periodontal splints, 

Discover Ceramic Bonding Enhancer

NA

( Tooth shaped pads allow the maximum retention strength. Small thickness for a perfect adjustment to the lingual surface, with ease of hygiene and lower patient discomfort. )

Discover One step Adhesive is a unique composite resin system for bonding plastic, metal or porcelain orthodontic brackets to etched enamel. The highly filled paste features a tacky viscosity that flows well and eliminates bracket flotation

NA

The finest and most economical orthodontic adhesive. • 40 seconds of working time for bond placement. • Final set in 4 minutes and wires can be tied into slot. • Enormous strength, even for torquing arches. • Shelf life of at least 3 years at room temperature

The finest and most economical orthodontic adhesive. • 40 seconds of working time for bond placement.

Beggs Bondable Tubes with Hooks.

• For use under direct and indirect restorations, including composite, amalgam, ceramic and metal restorations.

• All classes of fillings with light-curing composite or compomer.
• Core build-ups made of light-curing composite.
• Repair of composite or compomer fillings.

• Anabond-Stedman Yuseal Pit & Fissure Sealant

• The hydrophilic nature of One Coat Bond SL guarantees a good wetting of the tooth surface and facilitates thorough penetration into collagen fibers and dentinal tubules.

• One Coat 7 Universal is a light-cured, single component adhesive that offers long lasting bonding and excellent marginal integrity.

• Shofu FL-Bond II Etchant is an optional mild phosphoric acid etching agent. 

• Transbond MIP Moisture Insensitive Primer is a hydrophilic or moisture friendly material for bonding in a moist environment without giving up bond strength.

• An easy one-step system that creates an expanded placement window, giving you additional time for more precise positioning.

• Cavibond is a polymer reinforced Zinc oxide €"Eugenol cement for temporary restorations.

• The bonding agent contains 40% specially modified S-PRG fillers that release cariostatic fluoride to stimulate remineralization of the tooth in areas prone to demineralization, controls bacterial colonization and increases acid resistance
• Excellent handling and short application time of 35 seconds only

• Two Piece Buttons with Mesh.

• Light-cured acetone based dentin/enamel one-coat, one bottle bonding agent

• Highly aesthetic light-curing restorative material.
• Two simple steps, perfect results.

• 3M ESPE Disposable Applicator 50 Brush M Tips Dental Bonding Composite

• Unlimited working time to place steel and plastic or ceramic brackets.
• Cures in only 20 seconds of light exposure.

With BondPlus NT, adhesion promoters are carried in an ethanol solvent, diminishing both the tedious need for multiple coats and constant reapplication commonly found with acetone adhesives. BondPlus NT is indicated for both direct and indirect bonding applications.

Low film thickness assures the ideal surface to bond to restorative materials

Bond-It System is the 4th generation total-etch bonding system that offers a reliable technique proven over time. It is a perfect choice for dual and self-cure composites and bonding under amalgam. 

• Designed for quick and comfortable removal of directly bonded attachments

• Designed for quick and comfortable removal of directly bonded attachments

• Material: Stainless Steel The Instruments Are Made With Superb Perfection And Excellent Quality.
  Learn More

The risk to generate bubble or crack in forming porcelain is reduced by manufacturing products based on vacuum melting furnace.

Intraoral repairs of fractured facing crowns made of porcelain, hybrid ceramics or composite resin using light curing composite.

Intraoral repairs of fractured facing crowns made of porcelain, hybrid ceramics or composite resin using light curing composite.

The adhesive is also indicated for the surface treatment of zirconia and silica-based glass ceramics

Universal Adhesive

2 Step Self Etching Bonding System

Direct, light cured/self-cured composite and compomer restorations.

• As direct / indirect restorations with light cured composites.
• Single step bonding agent for direct composite restorations.
• Excellent adhesion to dentine and enamel.
• Long lasting bonding strength.
• Universal for all light curing restorations.

• Bonding for direct composite.
• Bonding for porcelain, composite, metal repair, set amalgam, post.
• Bonong for porcelain veneer.

Enhances bonding of resin materials (resin and cements) to porcelain (ceramic) and glass fiber.

• No postoperative sensitivities.
• High bond strengths on enamel and dentine.
• No shaking, no massaging.
• Tolerates moisture.
• No postoperative sensitivities.
• High bond strengths on enamel and dentine.
• No shaking, no massaging.
• Tolerates moisture.

• Direct self- or dual-curing composite restorations and core build-ups.
• Direct light-curing restoration with composite-, compomer- and Ormocer®-based restoratives.
• Adhesive luting of root pins/posts with dual or self-curing composite cements.
• Indirect restoration when using dual- and self-curing resin cements for luting of inlays, onlays, crowns and bridges.
• Chemical-curing in areas inaccessible for curing light.
• DC achieves the same adhesive properties as total-etch preparations without separate etching of the tooth substance.
• Universal application.

• Direct restoration of all cavity classes with all light-curing restoratives in total-etch technique.
• One component – one application.
• Excellent adhesion.
• High material elasticity and permanently tight margins.
• “Stick-immediately-effect” for easy application of the restorative.
• Universal for all light-curing restoratives.

• No separate etching.
• One coat only.
• Simplified handling technique which saves time - 30 seconds procedure.
• Fastest on the market.
• Three steps lasting 30 seconds only.
• Apply GC G-bond to cut enamel and dentine.
• Leave undisturbed for 10 seconds.

• 7 percent filler load.
• Patented formula with GPDM monomer.
• Water + Ethanol + Acetoneformula.
• Exellent penetration into dental tubules.
• Virtually eliminates post operative sensitivity for the patients.
• Three solvents provide effective dentine and enamel conditioning.

• Direct-placed light-curing composite and compomer restorations.
• Direct-placed core build-ups with light-, self- and dual-curing composites.
• Repair of fractured composite and compomer restorations.
• Adhesive cementation of indirect restorations with light- and dual-curing luting composites.
• Sealing of prepared tooth surfaces before temporary/permanent cementation of indirect resto-rations.
• Desensitization of hypersensitive cervical areas.

• Te-Econom Bond is a single-component bonding agent for enamel and dentin bonding in conjunction with the total-etch technique.
• One-bottle, one-layer adhesive.
• High bond strengths.
• Minimal evaporation of solvent (alcohol).
• Direct light-curing restorations.

• Consistently high bond strength on enamel and dentin for clinical success.
• Nano-fillers ensure a visible glossy coat which indicates complete coverage.
• Formation of a homogeneous layer for improved adhesion to the tooth structure.
• Reduced postoperative sensitivity.

• For optimum marginal seal between tooth and composite, when applied in conjunction with the enamel-etch technique.
• Storage at room temperature.
• Adhesive for enamel bonding.
• Together with Syntac also dentin bonding agent.
• Cementation of tooth jewelry, e.g. Skyce.
• Transparent sealing of fissures and restorations.

• FL-Bond II is radiopaque and biocompatible. Ideal viscosity of the bonding agent enables uniform application without pooling at the cavity floor.