1. See Detail

DMG Icon Proximal Surface

SKU
DMG Icon Proximal Surface
In stock
Quick Overview
  • Icon-Etch: Hydrochloric acid, pyrogenic silic - ic acid, surface-active substances.
  • Icon-Dry: 99% ethanol.
Special Price ₹6,450.00 was ₹6,500.00

DMG Icon Proximal Surface

Icon is used for the micro-invasive treatment of smooth surface and proximal caries lesions. It can be used to treat lesions into the first third of dentin (D-1). In one patient visit, and with no drilling, Icon can arrest the progression of early enamel lesions (caries) and white spot caries-like lesions

Icon represents an entirely new, revolutionary approach to treatment of incipient caries – a caries infiltrant. This breakthrough micro-invasive technology fills and reinforces demineralized enamel without drilling or anesthesia.

Failure of Previous treatments fall short because:

  • Fluoride therapy – not always effective in the advanced stages.
  • Filling almost always sacrifices significant amounts of healthy tooth structure.

COMPOSITION :-

  • Icon-Etch: Hydrochloric acid, pyrogenic silic - ic acid, surface-active substances.
  • Icon-Dry: 99% ethanol.
  • Icon-Infiltrant: Methacrylate-based resin matrix, initiators, additives.

INDICATIONS :-

  • Micro-invasive treatment of non-cavitated dental enamel lesions. 

CONTRAINDICATIONS :-

  • Do not use this material: • for deeper seated lesions (D2 – D3) or on cavitated enamel (enamel defects).
  • In case of known allergies to any material component or existing contact allergies.

ADVANTAGES :-

  • Icon provides an innovative, never-before-seen option for treatment of smooth surface and proximal carious lesions.
  • Instead of taking a “wait and see” approach, Icon can arrest the progress of early enamel lesions up to the first third of dentin – in one simple procedure, without unnecessary loss of healthy tooth structure.
  • Cosmetically remove white spot lesions in just one visit! • Icon offers a revolutionary approach to the cosmetic treatment of carious white spot lesions. • Lesions infiltrated by Icon take on the appearance of the surrounding healthy enamel. This provides a highly esthetic alternative to micro-abrasion and restorative treatments of cariogenic white spots – all in one simple treatment, with no drilling.

FEATURES :-

  • Arrests progression of lesions that are too advanced for fluoride therapy.
  • Enables immediate treatment of lesions not yet advanced enough for restoration (drill &fill); ends "wait & see" approach.
  • Next step beyond minimally invasive approach to dentistry.
  • No drilling or anesthesia required.
  • Patient comfort - no drilling pain.
  • Arrests caries progress without unnecessary loss of healthy hard tissue.
  • Prevents lesion progression.
  • Prolonged life expectancy of tooth.
  • Patients with poor compliance can be treated earlier.
  • Treated lesions lose whitish appearance and look like healthy enamel.
  • Cosmetic treatment of white spots in one patient visit.
  • Highly esthetic alternative to microabrasion and restorative treatments of cariogenic white spots.
  • Easy treatment in only one visit.
  • Patient comfort and convenience.
  • Frees up additional chairtime.

DIRECTIONS TO USE :-

  • Before the start of treatment, clean the affected tooth and adjacent teeth. Remove any cleaning residue with water spray
  • Create a sufficiently dry working field. Take appropriate measures such as rubber dam, liquid dam or similar, to protect the gingival tissue. Please follow the manufacturer’s specifications and instructions.
  • To ensure a successful treatment, a proximal separation of approximately 50 microns is required. Introduce one of the enclosed dental wedges into the treatment site.
  • For better access to the proximal region, the wedge handle can be bent or detached with a twisting motion. In order to obtain sufficient separation of the teeth the wedges must be seated at an adequate depth interproximally.
  • This should be done gradually: Insert the wedge to the point of resistance. Wait 3 to 5 s and gradually move the wedge deeper until sufficient separation is achieved.
  • Leave the wedge in the proximal space during the entire treatment procedure.
  • Alternatively, especially in cases of tight contacts, it is possible to separate the teeth with an orthodontic separator or other separation devices.
  • Uncovering the lesion body For best treatment results, the hyper mineralized surface layer must be removed
  • Screw the Proximal-Tip onto the Icon-Etch syringe and introduce the application tip into the treatment site. Be sure to align the green side of the Proximal-Tip with the area to be treated.
  • The material can only be dispensed on the green side of the application tip.
  • Apply an ample amount of Icon-Etch onto the lesion site (1 ½ to 2 turns of the shaft). Let Icon-Etch set for 2 minutes. The etching gel will be activated by slightly moving the applicator. Remove excess material.
  • Remove the application tip from the proximal area. Suction off Icon-Etch and rinse with water for a minimum of 30 s. Dry thoroughly with oil-free and water-free air.
  • Drying For best treatment results the lesion must now be desiccated.
  • Screw the application tip onto the Icon-Dry syringe, apply an ample amount of material onto the lesion and allow to sit for 30 s. Dry thoroughly with oil-free and waterfree air.
  • Infiltration Now that the lesion is completely desiccated, it is ready to absorb the infiltrating resin when applied.
  • ▸ Do not apply Icon-Infiltrant under direct operating light as this may cause the material to set prematurely.
  • Screw a new Proximal-Tip onto the Icon-Infiltrant syringe and introduce the application tip into the treatment site. Be sure to align the green side of the Proximal-Tip with the area to be treated.
  • The material can only be dispensed on the green side of the Proximal-Tip.
  • Apply an ample amount of Icon-Infiltrant onto the lesion site (1 ½ to 2 turns of the shaft).
  • Let Icon-Infiltrant penetrate fully for 3 minutes. Infiltration will be enhanced by slightly moving the applicator. Add small amounts of material during the three minutes. 11. Remove the application tip from the treatment site. Remove excess material with dental floss
  • Light-cure Icon-Infiltrant from all sides for at least 40 s (total)
  • Screw a new Proximal-Tip onto the IconInfiltrant syringe, repeat the application, and allow to penetrate for 1 minute. Remove the application tip from the site. Remove excess material with dental floss
  • Light-cure Icon-Infiltration from all sides for at least 40 s (total)
  • Screw a new Proximal-Tip onto the IconInfiltrant syringe, repeat the application, and allow to penetrate for 1 minute. Remove the application tip from the site. Remove excess material with dental floss. Then light-cure from all sides for at least 40 s (total)
  • If a second lesion needs to be treated repeat steps 1 through 13 for the affected site
  • Remove the wedge and rubber dam. Use polishing strips for the surface finish.

CONTENTS :-

1 Patient Kit

  • 1 x 0.30ml Syringe Icon-Etch.
  • 1 x 0.45ml Syringe Icon-Dry.
  • 1 x 0.45ml Syringe Icon-Infiltrant.
  • 6 x Smooth Surface Tips.

2 Patient Kit

  • 2 x 0.30ml Syringe Icon-Etch.
  • 2 x 0.45ml Syringe Icon-Dry.
  • 2 x 0.45ml Syringe Icon-Infiltrant.
  • 12 x Smooth Surface Tips.

7 Patient Kit

  • 7 x 0.30ml Syringe Icon-Etch.
  • 7 x 0.45ml Syringe Icon-Dry.
  • 7 x 0.45ml Syringe Icon-Infiltrant.
  • 42 x Smooth Surface Tips.
More Information
Brand N/A
Flavour N/A
Return Policy N/A
Opration / Power Source N/A

Product Faqs

Ask a Question




Ask a Question


Sort by   
    There are no faqs for this topic.
Write Your Own Review
You're reviewing:DMG Icon Proximal Surface
Your Rating

1 Patient Kit

  • 1 x 0.30ml Syringe Icon-Etch.
  • 1 x 0.45ml Syringe Icon-Dry.
  • 1 x 0.45ml Syringe Icon-Infiltrant.
  • 6 x Smooth Surface Tips.

2 Patient Kit

  • 2 x 0.30ml Syringe Icon-Etch.
  • 2 x 0.45ml Syringe Icon-Dry.
  • 2 x 0.45ml Syringe Icon-Infiltrant.
  • 12 x Smooth Surface Tips.

7 Patient Kit

  • 7 x 0.30ml Syringe Icon-Etch.
  • 7 x 0.45ml Syringe Icon-Dry.
  • 7 x 0.45ml Syringe Icon-Infiltrant.
  • 42 x Smooth Surface Tips.
We found other products you might like!

Buy dental products online by verified dental material supplier. Shop Dental supplies, dentist equipments, instruments and products by leading dental products company. Full-Time 100% warranty and denture supplies online.