Ultradent Silane Refill (410) Porcelain Etch

₹900.00
In stock
SKU
ULTRADENT-1

Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain.

Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin.
Studies have demonstrated that Silane, when used with Porcelain Etch and a quality bonding resin, yields the highest bond strength to porcelain when compared with other porcelain bonding products. Both Porcelain Etch and Silane may be used intraorally or extraorally.

  • Porcelain Etch is a viscous, buffered 9% hydrofluoric acid
  • Etch is easy to control and place
  • Will not stain composite or resin cement
  • Silane is a single-component solution
  • Yields highest porcelain-to-resin bond strengths
  • Porcelain Etch and Silane may also be used on lithium disilicate (IPS e.max) restorations

INDICATION:
Porcelain Etch is designed for intraoral or extraoral porcelain etching. Use it to etch porcelain or old macrofilled composites prior to bonding.

PROCEDURE :

  • STEP 1 : Etch clean bonding surface with Porcelain Etch for 90 seconds, rinse, and dry.
  • STEP 2 : CLINICAL TIP: Apply phosphoric acid (Ultra-Etch) for five seconds to remove porcelain salts and debris formed by hydrofluoric acid etching. Rinse and air dry.
  • STEP 3 : Apply a puddle coat of Silane to inside surface for 60 seconds, dry, and set prosthesis aside. Do not rinse.
More Information
Return Policy Not Accepted
Opration / Power Source N/A
Manufacturer N/A
Tech Info N/A
Write Your Own Review
You're reviewing:Ultradent Silane Refill (410) Porcelain Etch
Your Rating